搜索

[釣具] ISO rod for 前打

[複製鏈接]
even928 發表於 7/3/2008 08:20:47 | 顯示全部樓層 |閱讀模式 IP:- 澳大利亞
<
hi buddy,

if I am going to order a ISO rod for 前打, which rod length would be better, 4.5m or 5.3m ?

cheers
亞多哥 發表於 7/3/2008 09:38:55 | 顯示全部樓層 IP:- 香港
去直駁位 or 真正磯邊人工斜石駁玩?  點解吾買支打竿呢?
 樓主| even928 發表於 7/3/2008 10:01:48 | 顯示全部樓層 IP:- 澳大利亞
I only have limited budget, so I want to buy a rod that can do both
rock 1.jpg breakwater 1.jpg
these areas the two spots I want to use that rod with, so which rod length is more preferable?

Thanks
亞多哥 發表於 7/3/2008 10:08:34 | 顯示全部樓層 IP:- 香港
不是香港?  Anyway ….建議用支一般的 5.3m磯竿就可以一物二用, 如果可以的話買支頭節軟身/敏感既磯竿仲可以玩埋直感.
 樓主| even928 發表於 7/3/2008 10:17:16 | 顯示全部樓層 IP:- 澳大利亞
yep....
not in HK, it's Adelaide, South Australia

one more question, is Daiwa Liberty 2-53 ISO soft enough to do both ?
DriftsinkAngler 發表於 7/3/2008 10:54:47 | 顯示全部樓層 IP:- 美國
Shimano Fireblood Tentacle

Daiwa OLEGA 一徹 KS-V

[ 本帖最後由 DriftsinkAngler 於 2008-3-7 11:02 編輯 ]
亞多哥 發表於 7/3/2008 10:56:31 | 顯示全部樓層 IP:- 香港
 樓主| even928 發表於 7/3/2008 11:43:25 | 顯示全部樓層 IP:- 澳大利亞
thanks for your suggestions, DriftsinkAngler....
those rods looks good....
but well above my budget...

my budget is no more than 9500 yen  >_<
DriftsinkAngler 發表於 7/3/2008 21:39:28 | 顯示全部樓層 IP:- 香港
Try to locate a rod with a tip of 0.7mm for #1.5. Normally the right choice!
 樓主| even928 發表於 7/3/2008 22:24:30 | 顯示全部樓層 IP:- 澳大利亞

回復 9# 的帖子

thanks for your advice again ^^

when I'm looking at the spec. of Japanese rods, they have a section called 錘負荷, I wonder if that's mean the max. sinker weight that rod can sustain, am I right ? and how to convert the value from 号 to gram ?

Thanks

PS: sorry that I have so many questions >_<
您需要登錄後才可以回帖 登錄 | 魚民註冊

本版積分規則

手機版|聯繫魚樂網|FISHINGHK.com™  

GMT+8, 26/4/2025 16:17 , Processed in 0.166617 second(s), 59 queries , Gzip On.

Powered by Discuz! X3.5 © 2001-2017 Comsenz Inc.

System by FISHINGHK.com Since 2007-2-16

快速回復 返回頂部 返回列表